Peddiworker No.1
- Description
- Flat Bar Shear
- Section and Bar Stock Shear
- Notcher with square notching attachment:
- Punch Unit
- Machine Data
- Standard scope of delivery
Description
| cuts flat bar with minimum distortion | up to mm | 400 x 20 |
| angle iron, 45° cut | up to mm | 120 x 12 |
| blade cut length | mm | 425 |
| working height | mm | 800 |
| cross secton | max.mm² | 2320 |
| stroke, infinitely adjustable | mm | 10 – 42 |
| cuts with standard blades 90°: | ||
| angle iron, 90° cut | up to mm | 120 x 10 |
| rounds | mm | 40+20 |
| squares | mm | 40+25 |
| Cuts with special blades: | ||
| channels, 90° cut | up to mm | 160 |
| I beams, 90° cut | up to mm | 160 |
| working height (to centre of blades) | mm | 1.200 |
| With square notcher: | ||
| Sheet | Up to mm | 13 |
| L profiles | Up to mm | 80 x 10 |
| U profiles (on the wing) | mm | 80 – 140 |
| Double T (on the wing) | mm | 80 – 160 |
| Notching width | mm | 52 |
| Depth | mm | 70 |
| With triangular notcher 90º: | ||
| Sheet | Up to mm | 13 |
| L profiles | Up to mm | 65 x 10 |
| U profiles (on the wing) | mm | 80 – 140 |
| Double T (in the wing) | mm | 80 – 160 |
| Depth | mm | 55 |
| Working height | mm | 1,176 |
| Rated capacity | kN | 900 |
| Stroke, infinitely adjustable | mm | 10 – 42 |
| Number of strokes, punch unit, 20 mm. | min-1 | 26 |
| Throat depth | mm | 250 |
| Working height | mm | 1.175 |
| punches with standard punching attachment | ||
| with flat die bolster | up to mm | Ø 31 en 22 |
| oblong holes | up to mm | 22×31 en 20 |
| with universal die block: | up to mm | Ø 31 in 15 |
| channels in flange | mm | 80 – 300 |
| I beams in flange | mm | 80 – 320 |
| channels in web | mm | 80 – 240 |
| I beams in web | mm | 80 – 220 |
| punches with oversize punching attachment | ||
| • SV 58 / 65 | up to mm | Ø 58 en 11 |
| o | up to mm | Ø 65 en 10 |
| ref. no. | 40900 | |
| Kn | 900 | |
| power rating | kW | 4 |
| charge of oil | l | 45 |
| net weight with oil | appr. kg | 1200 |
| overall machine L x W x H | cm | 121x69x192 |
- flat shear blades, 425 mm long, also for shearing angle iron 45°
- material support table with gauge stops on the flat shear station
- section shear knife for 90° shearing angle iron as well as rounds and squares
- quick-change punching attachment up to 31 mm Ø, for the green series, with material support table
- height-adjustable and push-away stripper with exchangeable plate
- square notching attachment
- material support table on the notcher station
- two-stage foot pedal and electrical control elements
- connecting socket for external engagement, e.g. via linear gauging track
- integrated hydraulic power pack
- three-phase A.C. motor, 400 Volt, 50 Hz
- LED light in the punching area
Accesories
Hydraulic Down Holder
Universal Electrical Contact Length Stop
suitable for all Peddinghaus section and flat bar shears, current models and preceding generations
